How much tile do you need?
Enter the room and the tile’s face size. Joints are added to each tile. Waste defaults to 10% because retailers often suggest about 10% extra for a straight layout and more for diagonals or cut-up rooms — that is a common practice note, not a TCNA rule we can cite. This tool does not design the substrate, membrane, or adhesive.
Project details
Enter the dimensions to see a planning estimate.
How this is calculated
What we will not invent
Industry handbooks such as the TCNA handbook are widely referenced for tile installation, but the handbook itself is not a free public document we can quote. We therefore will not attribute a 10% or 15% waste figure to TCNA. The waste field is yours. A 10% default matches what many retailers print as a starting point for a simple rectangular layout; complicated layouts need more, and a single leftover box is often cheaper than a second dye lot later.
Example: a 10 × 12 ft room (120 sq ft) of 12 × 12 in. tile with a 1/8 in. joint has a unit area of 12.125 × 12.125 ÷ 144 = 1.021 sq ft. That is 118 tiles before waste and 130 after 10%, rounded up. If the box holds 15 tiles, that is 9 boxes.
This calculator does not size backer board, thinset coverage, or grout volume, and it does not tell you whether a floor is suitable as a wet area. Those are specification questions.
FAQ
How much extra tile should I buy?
We default to 10% as a starting point you can change. Retailers often suggest about 10% for a straight layout and more for diagonals. We could not cite a TCNA percentage from the handbook itself.
Do you calculate boxes?
Yes, if you enter how many tiles are in a box. We divide the rounded-up tile count by that number and round boxes up.
Can I use this for vinyl plank or other flooring?
You can use it for any rectangular unit with a known face size. It still does not design the underlayment or account for expansion gaps beyond the joint you type.