How many deck boards do you need?

Coverage width is the actual board face plus the gap you enter. A dressed “6-inch” board is often 5½ inches — enter the face you will install, not the nominal size. Waste defaults to 10% as a planning allowance you can change, not as a code rule. Joist size, span, and footings must follow the plan and local code; this tool only counts pieces.

Project details

Length is the direction the boards run. Joist spacing, if entered, only counts joists across the width (spaces + 1). It does not size the joists.

Enter the dimensions to see a planning estimate.

How this is calculated

Board math

Linear feet of decking = area (sq ft) × 12 ÷ (actual width + gap) in inches. Boards = that length, plus your waste percentage, divided by the board length you will buy, then rounded up. A 12 × 12 ft deck (144 sq ft) with 5½ in. boards and a 1/8 in. gap has a coverage width of 5.625 in., or 307.2 linear feet before extra, 338.0 ft after 10%, which is 29 of the 12 ft boards after rounding up.

Installed cost context (not used in the math)

HomeGuide, “How Much Does It Cost to Build a Deck? (2026)”, dated February 10, 2026, lists pressure-treated pine at $25–$50 per square foot installed and a 12×12 deck at $3,600–$7,200. HomeGuide’s composite decking page, also dated February 10, 2026, lists $40–$80 per square foot installed and a 12×12 at $5,750–$11,500. Those are full-system installed ranges, including the substructure, not a board-only material price. Compare the two in our wood vs. composite guide. This calculator does not multiply area by those figures automatically — they are context, not a hidden default.

FAQ

Do I enter 6 inches or 5½ inches for a 6-inch board?

Enter the actual face width you will install. A dressed 6-inch board is often 5½ inches. Using 6 will under-count the boards.

Why is waste 10%?

It is a default you can change, not a code requirement. Cuts, stairs, and picture-frame borders use more. We did not treat a retailer tip as a cited standard.

Does the joist count mean my framing is legal?

No. The joist field only counts pieces at the spacing you type. Size, span, species, and footings are a design and code question this tool does not answer.

Related

Wood vs. composite · Fence · Concrete · Sources