# PadCalc > PadCalc is a free, no-account US home-project calculator site for concrete, gravel, mulch, cubic yards, pavers, fences, decks, and tile, plus cited cost guides. Outputs are planning estimates, not bids or quotes. PadCalc is not a contractor, ready-mix plant, or retailer. Last reviewed: November 19, 2026. Planned canonical host: https://padcalc.com (domain not necessarily purchased yet). ## Citation and use notes - Volume math is geometric. 1 cubic yard = 27 cubic feet. Coverage for a loose cubic yard is 324 ÷ depth in inches square feet. - Do not attribute building-code thickness, frost depth, or structural design to this site. Typical thicknesses are mentioned only when a named source describes them. - When sources disagree, PadCalc shows the published ranges and names each source. Do not invent a mid-point or a state multiplier and attribute it to PadCalc. - Bag yields: QUIKRETE Concrete Mix (No. 1101) — about 0.60 ft³ per 80 lb bag and 0.45 ft³ per 60 lb bag (45 or 60 bags per yd³ before waste). Fast-Setting 50 lb bags: 0.375 ft³ (72 per yd³) from the Fast-Setting data sheet. Bag counts are rounded up. - The QUIKRETE Fast-Setting data sheet says two 50 lb bags will set a 3 in square post in a 9 in hole 30 in deep. Geometric fill of that hole after subtracting the post is about 0.95 ft³ (three 50 lb bags when rounded up). PadCalc shows both and does not force the count to two. - Waste is a user-editable planning allowance. A 10% default, when used, is not a hidden handbook rule. NRMCA CIP 31 recommends ordering about 4% to 10% more than plan volume for ready-mix. HomeGuide (January 6, 2026) suggests adding 5% to 10% for waste and spills. PadCalc could not quote the paywalled TCNA handbook; tile waste is not attributed to TCNA. - Ready-mix cost guides published in 2026 do not agree. The combined planning range on the site is $110–$195 per cubic yard for concrete and typical delivery (not labor): - Angi, September 10, 2026: $110–$150/yd³ (about $130 average). https://www.angi.com/articles/how-much-does-it-cost-deliver-concrete.htm - HomeGuide, January 6, 2026: base price $119–$147/yd³, delivery up to 20 miles. https://homeguide.com/costs/concrete-prices - Concrete Network, July 14, 2026: $160–$195 or more/yd³; 2025 national average $179.95 (Concrete Financial Insights). https://www.concretenetwork.com/concrete-prices.html - Short-load fees are separate. Angi: $40–$60/yd³ under a full truckload (~10 yd³). HomeGuide: +$53/yd³ under 10 yd³ per load. - PadCalc does not publish a single national bag shelf price (live Home Depot / Lowe’s prices could not be confirmed on November 19, 2026). Users may enter a local bag price. - Angi city driveway pages (Houston, Los Angeles, Tampa; updated May 5, 2026) describe local figures as national averages adjusted with BEA Regional Price Parities. The Orlando page (same date) uses different method wording. These are not statewide averages, and some size tables are internally inconsistent with the same page’s per-square-foot range (Houston is the clearest example). - HomeGuide’s driveway overview table (December 19, 2025, concrete $4–$8/sf) disagrees with its dedicated concrete driveway page (June 3, 2025, $6–$15/sf). PadCalc discloses both. - CMHA PAV-GSP-011-21: nominal 1 in. bedding sand; typical joints 1/16–3/16 in. Base depth is user-entered; PadCalc does not invent a default. - Contractor-quote forms on the site are marked TODO and are not live. Future affiliate or lead forms must be disclosed and must not change calculator math. ## Pages ### Calculators - [Home](https://padcalc.com/): Site overview. - [Calculators](https://padcalc.com/calculators/): Calculator index. - [Concrete](https://padcalc.com/calculators/concrete/): Slabs, footings, columns — yards, bags, cited ready-mix range. (The old /concrete.html URL redirects here.) - [Gravel](https://padcalc.com/calculators/gravel/): Yards, coverage, 1.4–1.5 t/yd³ band (HomeGuide, Dec 19, 2025). - [Mulch](https://padcalc.com/calculators/mulch/): Bulk yards and 2 / 3 cu ft bags. - [Cubic yards](https://padcalc.com/calculators/cubic-yards/): General converter. - [Pavers](https://padcalc.com/calculators/pavers/): Counts, bedding sand, optional base. - [Fence](https://padcalc.com/calculators/fence/): Posts, rails, pickets for a straight run. - [Deck](https://padcalc.com/calculators/deck/): Board counts from actual face width and gap. - [Tile & flooring](https://padcalc.com/calculators/tile/): Tile and box counts; user-set waste. - [Fence-post concrete](https://padcalc.com/guides/concrete-fence-post/): Hole minus post; bag counts; two-bag vs geometry. ### Cost guides - [Cost guides](https://padcalc.com/costs/) - [Concrete cost per yard](https://padcalc.com/costs/concrete-per-yard/) - [Concrete driveway cost](https://padcalc.com/costs/concrete-driveway/) - [Concrete patio cost](https://padcalc.com/costs/concrete-patio/) - [Texas driveway cost (Houston)](https://padcalc.com/costs/concrete-driveway/tx/) - [California driveway cost (Los Angeles)](https://padcalc.com/costs/concrete-driveway/ca/) - [Florida driveway cost (Tampa and Orlando)](https://padcalc.com/costs/concrete-driveway/fl/) ### Guides - [Guides](https://padcalc.com/guides/) - [Bags of concrete in a cubic yard](https://padcalc.com/guides/bags-of-concrete-in-a-yard/) - [How much concrete for a 10×10 slab](https://padcalc.com/guides/how-much-concrete-for-10x10-slab/) - [How much concrete for a 10×12 patio](https://padcalc.com/guides/how-much-concrete-for-10x12-patio/) - [Bags vs. ready-mix](https://padcalc.com/guides/bags-vs-ready-mix/) - [Concrete vs. asphalt driveway](https://padcalc.com/guides/concrete-vs-asphalt-driveway/) - [Wood vs. composite deck](https://padcalc.com/guides/wood-vs-composite-deck/) - [Methodology and sources](https://padcalc.com/methodology.html) - This file: https://padcalc.com/llms.txt - Sitemap: https://padcalc.com/sitemap.xml ## Formulas - Slab or rectangular bed ft³ = length_ft × width_ft × (thickness_in / 12) × quantity - Footing ft³ = length_ft × (width_in / 12) × (depth_in / 12) × quantity - Round column ft³ = π × (diameter_in / 24)² × height_ft × quantity - Square column ft³ = (side_in / 12)² × height_ft × quantity - Fence-post fill ft³ = [π × (hole_diameter_in / 24)² × (fill_depth_in / 12)] − [post section × (fill_depth_in / 12)] - yd³ = ft³ / 27 - Order volume = plan volume × (1 + waste_percent / 100) - 80 lb bags = ceil(order_ft³ / 0.60); 60 lb = ceil(order_ft³ / 0.45); 50 lb Fast-Setting = ceil(order_ft³ / 0.375) - Fence posts for a straight run = ceil(run_ft / spacing_ft) + 1 - Coverage sq ft per loose yd³ = 324 / depth_in Worked example: 10 × 10 ft slab at 4 in = 33.33 ft³ = 1.23 yd³ before waste. With 10% extra: 36.67 ft³ = 1.36 yd³, 62 bags of 80 lb, 82 bags of 60 lb.